Print Quality Troubleshooting - Xante Accel-a-Writer 8200 Troubleshooting Manual

•
•
•
§ The Accel-a-Writer 8200 does not show up on the Chooser.
Possible Solutions:
•
•
•
•
•
•

Print Quality Troubleshooting

This section covers print quality troubleshooting. For other general
troubleshooting matters, see the previous section "Miscellaneous
Troubleshooting."
_____________________________________ Troubleshooting 10-17
Select the Chooser from the Apple menu, make
sure LocalTalk is active, and select the
Accel-a-Writer 8200 printer.
If you have an Ethernet setup, select Control
Panels from the Apple menu; then select Network
and make sure EtherTalk is selected.
Continue printing as usual.
Check for proper termination on all LocalTalk
cables and boxes. See "Connecting in a Macintosh
Environment" in chapter 2 for details.
If you have an Ethernet setup, make sure all
Ethernet cabling is connected correctly. See your
network documentation for details.
Make sure the interface is enabled.
Disable all background printing and print spoolers.
Try a new cable between your Macintosh host and
printer.
Reboot the printer and your host. Try selecting the
Accel-a-Writer 8200 from the Chooser again.