Xante Accel-a-Writer 8200 Manual page 11

5. Adjust the paper stop on the output tray for the size media you
are using (fig. 2.13).
6. Select the paper cassette as the media source through the front
panel using the Tray Select key or through your application
(see your application documentation for details).
Note: Usually, if settings differ, applications have priority,
followed by XANTÉ Utility, and then printer front
panel settings.
7. Print as you normally would.
Using the Optional Paper Feeder
With the addition of the optional paper feeder, you can print from a
second paper cassette. For example, if you regularly use both letter
and ledger size media, you can load up to 250 sheets in the standard
letter cassette and another 250 sheets in the standard ledger cassette
and place both in the printer, for a capacity of 500 in the cassettes.
Plus you can have another 100 sheets in the fold down tray, for a
total capacity of 600 sheets. Select the desired source tray through
the front panel or your application.
Note: If you use a larger cassette than the Letter/A4 one, install the
cassette cover on the back of the printer. This cover prevents
dust and debris from getting into and building up in the
printer where it can reduce print quality.
If you need a higher input capacity, you have the option of ordering a
500 sheet capacity letter cassette and cassette supporter which works
with the paper feeder. This can boost your printer's capacity to a
total of 850 sheets (including the 100 sheet fold down tray).
Media loading for both the standard letter/A4 cassette and the
optional 500 sheet cassette is the same. See the previous section,
"Using a Paper Cassette," for details.
___________________________________ Routine Operations 6-11