Printing Double-Sided Copy - Xante Accel-a-Writer 8200 Manual

• Do not use thick, rough, textured, curled, torn, or
otherwise damaged media.
• Make sure the correct size media is loaded in the printer.
• If you print in a Macintosh environment, make sure the
current APDs, PPDs, and PDFs (print drivers) are installed
in your system. See "Drivers Folder" in chapter 3 for
details on drivers.
• If you print in a PC environment with a Windows
application, make sure the current Windows driver is
installed on your system. See "Windows Setup" in chapter
4 for details.

Printing Double-Sided Copy

To print on both sides of the sheet using the fold down tray
1. Print the first side as you would do normally using the fold
down tray. See "Using the Fold Down Tray" earlier in this
chapter for details.
2. Remove the media from the output tray, straighten any curling
edges, and allow the media to cool thoroughly.
3. Reload the media into the fold down tray using the following
guidelines:
a. Determine the leading edge for the second printing side.
This edge varies depending on the printing mode and
paper size. See "Feeding Media to the Printer" earlier in
this chapter for details.
b. Check your software to determine where to place the top
edge of the media.
c. Load the media with the second printing side down,
leading edge first.
4. Print the second side.
___________________________________ Routine Operations 6-21