Xante Accel-a-Writer 8200 Manual page 23

4. Gently rock the cartridge to redistribute toner evenly
throughout the cartridge (fig. 6.6).
5. Replace the toner cartridge into the printer.
6. Close the front cover.
7. Close the fold down tray if you are not going to use it, or load
media if you are going to use it.
8. Print a test file to check the density. If you want to make
further adjustments, continue to the next section, "Adjusting
the Density Dial."
Adjusting the Density Dial
You can make fine adjustments to print density using the density dial
inside the printer. To adjust this dial
1. Open the fold down tray, or if it is already open and has media
loaded, remove the media.
___________________________________
Fig. 6.6 Redistribute the Toner
Routine Operations 6-23