Xante Accel-a-Writer 8200 Manual page 13

2. Prepare up to 100 sheets (approximately 3/8" [10 mm] thick or
less) of laser or photocopier paper, up to 50 transparencies, or
up to 40 sheets of labels. To do this:
a. Make sure the media meets all requirements listed in
"Selecting Media" earlier in this chapter.
b. Determine the printing side of the media. Most paper
package wrappers have an arrow pointing to the printing
side or another form of label on the media itself.
c. If you feed multiple sheets, fan paper to prevent it from
sticking together.
Note:
d. Determine the media's leading edge. This varies
depending on the printing mode and media size. See
"Feeding Media to the Printer" earlier in this chapter for
details on determining the leading edge.
e. If you feed multiple sheets, align the media edges to
form a smooth stack.
3. Pull out the tray extender for support if the selected media will
extend past the end of the fold down tray (fig. 6.4).
Fig. 6.4 Pull Out the Tray Extender
___________________________________
Do not fan transparencies or labels. Fanning
transparencies causes static buildup and fanning
labels causes them to pull loose from the backing.
Routine Operations 6-13