Driver and Software Installation
Driver and Software Installation
This chapter will guide you through the installation of the drivers,
software and documentation associated with your B
Display System or B
If you install Barco displays without Barco display controllers, no
drivers will be installed. Only the online user manual will be installed
on your system.
Driver and software installation prerequisites
Note: To install or remove the drivers, software, or
documentation you must be logged on as a user with
administrator privileges.
Your operating system must be installed and running before you can
install the driver, software and documentation for the display
controller(s) for your B
Before you begin make sure that all of your B
Display(s) are connected to the appropriate display controller(s) in
your system.
Note: This installation procedure is based on operating
Windows in "Classic" view style. If "Home" or "Default" view
style is selected in Windows, sections of this procedure may be
different than what is listed.
Installing the B
Note: The installation dialog will display in English if your
operating system's language is not supported.
This process applies to the following versions of Windows:
• Windows XP Professional,
• Windows XP Professional x64 Edition,
50
N
F
Display(s).
ARCO
IO
USION
N
F
ARCO
IO
USION
MXRT drivers and software
ARCO
ARCO
Display System.
N
F
ARCO
IO
N
F
IO
USION
USION