Barco LCD Display Getting Started Manual page 26

Display Controller Installation
Figure 3: Power connection for the MXRT 5100 and 7100 controllers
Figure 4: Power connection for the MXRT 7200 controller
Screw in or fasten the display controller securely. Replace and
9.
secure the computer cover.
Connect your B
10.
controller(s) for your B
cables supplied. Make sure all cables are securely connected
26
N F Displays to the display
ARCO IO USION
N F
ARCO IO
6-pin graphics controller
power cable
6-pin graphic controller
power cables - connect
2 cables as shown
Display System using the
USION