Barco LCD Display Getting Started Manual page 40

Connecting the signal cables
Connect the signal cables:
6.
• For Single View mode, connect one end of a DVI cable to any
of the DVI inputs of the display (4) or (5). Connect the other
end of the DVI cable to the DVI connector of the graphic board.
• For DuoView mode, connect Head1 of the graphic board to
the "left" DVI connector (5) and connect Head2 to the "right"
DVI connector (4).
• Connect the display's USB upstream connector (6) to a PC USB
downstream connector by means of a USB cable.
• Connect any USB device to one of the display's USB
downstream connectors (7).
• Connect the DC power input (9) of the display to the supplied
external DC power supply. Connect the other end of the
external DC power supply (10) to a grounded power outlet by
means of the proper power cord delivered in the packaging.
40
R
Figure 13: Signal cable connections
4
5
L
6
7
8
9