Mxrt Driver And Intuitive Workflow Tools Installation - Barco Nio 5.8MP Gray User Manual

Image 2–8
6. Close the connector compartment cover. You will hear a "click" sound when the cover is in position.
Image 2–9
7. Connect the external DC power supply to a grounded power outlet by using one of the power cables
included with the display.
2.4 MXRT driver and Intuitive Workflow Tools
installation
About
When you are using a Barco MXRT display controller, you can start up your Nio 5.8MP Gray display system
and install the MXRT driver and Intuitive Workflow Tools . Barco's Intuitive Workflow Tools are designed to
increase visibility of subtle details, improve focus during reading sessions, and accelerate workflow.
To install the MXRT driver and Intuitive Workflow Tools
1. Switch on your Nio 5.8MP Gray as described in
2. Turn on the workstation connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
3. Download the latest MXRT driver and Intuitive Workflow Tools from
4. Install the MXRT driver and Barco's Intuitive Workflow Tools as described in the Barco "Display
Controller and Intuitive Workflow Tools" user guide on the included documentation CD, or at
com/support.
"Standby switching", page
www.barco.com/mxrt.
K5902142 /07
Installation
19.
www.barco.
Nio 5.8MP Gray 13