Barco LCD Display Getting Started Manual page 51

• Windows Server 2003,
• Windows Server 2003 x64 Edition,
• Windows Server 2008,
• Windows 2008 x64, and
• Windows Vista 32 & 64 Bit Edition.
You will need to install the B
and software in the following cases:
• After you have installed the display controller(s) for your
B N
ARCO IO
time.
• After you have reinstalled or upgraded your operating system.
• After you have moved the display controller(s) to a different
PCI/PCIe slot.
• When you upgrade to a newer version of the MXRT driver.
• When you put additional MXRT display controllers in your
system.
You do not need to manually uninstall an existing driver before
1.
updating to the current version. The Barco Product Installation
Wizard will detect any prior installations and start the
uninstallation process automatically.
Start your system. When the Found New Hardware Wizard
comes up, click Cancel. When the System Settings Change
window asks you to restart your computer, click No or Restart
Later.
Run the Barco Product Installation Wizard.
2.
The Barco Product Installation Wizard should start automatically
when you insert the B
CD-ROM into your computer's CD/DVD drive after the operating
system has started. If your CD/DVD drive's auto-run is not
enabled or the Barco Product Installation Wizard does not start
automatically, you can run the Barco Product Installation Wizard
manually by following these steps:
Click the Start button in the task bar.
a)
N
ARCO
F Display System in your system for the first
USION
N
ARCO IO
Driver and Software Installation
F Display system drivers
IO USION
F Display System Installation
USION
51