Installing The Printer On A Wireless Network (Macintosh) - Lexmark C736 series User Manual

Additional printer setup
7
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so
you can print wirelessly.
8
Follow the instructions on the computer screen to complete the software installation.
Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your
installation.
9
To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step 8
for each computer.

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer
1
Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address
in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___
2
Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
1
Enter the printer information
1
Access the AirPort options.
2
38