Reports Menu - Lexmark C736 series User Manual

Understanding printer menus
Menu item
Portrait Height
3–14.17 inches
76–360 mm
Feed Direction
Short Edge
Long Edge

Reports menu

Reports menu
Menu item
Menu Settings Page
Device Statistics
Network Setup Page
Description
Sets the portrait height
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the US factory default setting. Inches can be increased in
0.01‑inch increments.
• 356 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Specifies the feed direction
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Description
Prints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, and the status of the network
connection
Note: The page prints when this item is selected.
Prints a report containing printer statistics such as supply information and details
about printed pages
Note: The page prints when this item is selected.
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
•
This menu item appears only for network printers or printers connected to
print servers.
•
The page prints when this item is selected.
88