Network Reports Menu - Lexmark C736 series User Manual

Understanding printer menus
Menu item
Job Buffering
Off
On
Auto
Mac Binary PS
On
Off
Auto
Std Network Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLink
Net <x> Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLink

Network Reports menu

This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Reports or Network
Reports
Description
Temporarily stores jobs on the printer hard disk before printing. This menu only
appears if a formatted disk is installed.
Notes:
• Off is the factory default setting.
• The On value buffers jobs on the printer hard disk. This menu selection
appears only when a formatted disk is installed and is not defective.
• The Auto setting buffers print jobs only if the printer is busy processing data
from another input port.
•
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
For descriptions and settings of the network setup menus, see the following:
•
"Network Reports menu" on page 91
•
"Network Card menu" on page 92
•
"TCP/IP menu" on page 92
•
"IPv6 menu" on page 94
•
"Wireless menu" on page 94
•
"AppleTalk menu" on page 95
•
"NetWare menu" on page 95
•
"LexLink menu" on page 96
Note: The Wireless menu appears only when the printer is connected to a wireless
network.
91