Installing The Printer On A Wireless Network (Macintosh) - Lexmark T656dne User Manual

Additional printer setup
b
If your printer has faxing capabilities, then connect the telephone cable.
8
Follow the instructions on the computer screen to complete the software installation.
9
To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step 8
for each computer.

Installing the printer on a wireless network (Macintosh)

Before you install the printer on a wireless network, make sure that:
•
An optional wireless card is installed in your printer.
•
Your wireless network is set up and working properly.
• The computer you are using is connected to the same wireless network where you want to set up the printer.
Prepare to configure the printer
1
Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address
in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___
2
If your printer has faxing capabilities, then connect the telephone cable.
3
Connect the power cable, and then turn the power on.
2
2
Enter the printer information
1
Access the AirPort options:
In Mac OS X version 10.5
a
From the Apple menu, choose System Preferences.
b
Click Network.
c
Click AirPort.
In Mac OS X version 10.4 and earlier
a
From the Go menu, choose Applications.
b
Double‑click Internet Connect.
c
From the toolbar, click AirPort.
2
From the Network pop‑up menu, select print server xxxxxx, where the x's are the last six digits of the MAC address
located on the MAC address sheet.
3
Open the Safari browser.
45