Troubleshooting
•
Cancel the print job. Press the up or down arrow button until
•
For more information, press the up or down arrow button until
then press
.
Remove all color supplies
The printer is set for Color Lock Out printing in the Config menu. Try one of the following methods:
•
Remove all color toner cartridges and photoconductor units.
Note: Do not remove the black toner cartridge or photoconductor unit.
•
Press the up or down arrow button until
Color Lock Out mode.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Remove packaging material, check <area name>
1
Remove all packing material from the printer.
2
Make sure the fuser, transfer module, trays, and supplies are installed correctly.
3
Press the up or down arrow button until Show Areas appears, and then press
Securely clearing disk space
The printer hard disk wiping process needs to recover. The message clears when all blocks are cleared.
Restore Held Jobs?
•
Press the up or down arrow button until
the printer hard disk.
•
Press the up or down arrow button until
restored.
Some held jobs were not restored
Press the up or down arrow button until
Unsupported disk
An unsupported printer hard disk has been installed. Remove the unsupported device, and then install a supported
one.
Continue appears, and then press
Restore appears, and then press
Do not restore appears, and then press
Continue appears, and then press
Cancel job appears, and then press
Show me or
Tell me more appears, and
to clear the message and print in
.
to restore all held jobs stored on
to delete the specified job.
161
.
. No print jobs will be