Troubleshooting
58 Too many trays attached
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
59 Incompatible tray <x>
Only options designed specifically for this printer are supported.
Try one or more of the following:
•
Remove the specified tray.
•
Press the up or down arrow button until
printing without using the specified tray.
61 Remove defective hard disk
•
Press the up or down arrow button until
printing.
•
Install a different hard disk before performing any operations that require a hard disk.
62 Disk full
•
Press the up or down arrow button until
processing.
•
Delete fonts, macros, and other data stored on the hard disk.
•
Install a larger hard disk.
63 Unformatted disk
•
Press the up or down arrow button until
printing.
•
Format the disk.
If the error message remains, the hard disk may be defective and require replacing.
80.xx Fuser near life warning
•
Press the up or down arrow button until
printing.
•
Order a replacement fuser immediately. When print quality is reduced, install the new fuser using the instruction
sheet that came with the replacement part.
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
to clear the message and continue
to clear the message and continue
to clear the message and continue
to clear the message and continue
to clear the message and continue
166