Adjusting The Brightness Of The Display - Lexmark C736 series User Manual

Minimizing your printer's environmental impact
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2
Click Settings, and then click General Settings.
3
Click Timeouts.
4
In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters
Power Saver mode.
5
Click Submit.
Using the printer control panel
1
Make sure the printer is on and Ready appears.
2
Press .
3
Press the up or down arrow button until
4
Press the up or down arrow button until
5
Press the up or down arrow button until
6
Press the up or down arrow button until
7
Press the up or down arrow button to increase or decrease the number of minutes before the printer enters Power
Saver mode, and then press

Adjusting the brightness of the display

Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Settings, and then click Utilities Menu.
3
In the LCD Brightness box, type in the brightness you want for your display. Available settings range from 1–10. The
factory default setting is 5.
4
Click Submit.
Using the printer control panel
1
Make sure the printer is on and Ready appears.
2
Press .
3
Press the up or down arrow button until
4
Press the up or down arrow button until
Settings appears, and then press
General Settings appears, and then press
Timeouts appears, and then press
Power Saver appears, and then press
.
Settings appears, and then press
Utilities Menu appears, and then press
.
.
.
.
.
.
50