Understanding printer menus
Menu item
Font Priority
Resident
Flash/Disk
Image Smoothing
On
Off
PCL Emul menu
Menu item
Font Source
Resident
Disk
Download
Flash
All
Font Name
RO Courier
Description
Establishes the font search order
Notes:
•
Resident is the factory default setting.
•
A formatted flash memory option card or printer hard disk must be
installed in the printer and operating properly for this menu item to be
available.
•
The flash memory option or printer hard disk cannot be Read/Write,
Write, or password protected.
•
Job Buffer Size must not be set to 100%.
Enhances the contrast and sharpness of low‑resolution images and smooths
their color transitions
Notes:
•
Off is the factory default setting.
•
Image Smoothing has no effect on images that are 300 dpi or higher in
resolution.
Description
Specifies the set of fonts used by the Font Name menu item
Notes:
•
Resident is the factory default setting. It shows the factory default set of
fonts downloaded into RAM.
•
Flash and Disk settings show all fonts resident in that option.
•
Flash option must be properly formatted and cannot be Read/Write,
Write, or password protected.
•
Download shows all the fonts downloaded into RAM.
•
All shows all fonts available to any option.
Identifies a specific font and the option where it is stored
Notes:
•
RO Courier is the factory default setting.
•
RO Courier shows the font name, font ID, and storage location in the
printer. The font source abbreviation is R for Resident, F for Flash, K for
Disk, and D for download.
121