Utilities Menu - Lexmark C736 series User Manual

Understanding printer menus

Utilities menu

Menu item
Remove Held Jobs
Confidential
Held
Not Restored
All
Format Flash
Yes
No
Delete Downloads on Disk
Delete Now
Do Not Delete
Job Acct Stat
Print
Clear
Hex Trace
Activate
Coverage Estimator
Off
On
Description
Removes confidential and held jobs from the printer hard disk
Notes:
• Selecting a setting affects only print jobs that are resident in the printer.
Bookmarks, jobs on flash drives, and other types of held jobs are not affected.
• Selecting Not Restored removes all Print and Hold jobs that were not restored
from the disk.
Formats the flash memory. Flash memory refers to the memory added by installing
a flash memory option card in the printer.
Warning—Potential Damage: Do not turn off the printer while the flash memory is
formatting.
Notes:
•
A flash memory option card must be installed in the printer and operating
properly for this menu item to be available. The flash memory option card
must not be Read/Write or Write protected.
•
Selecting Yes deletes all data stored in flash memory.
• No cancels the format request.
Removes downloads from the printer hard disk, including all held Jobs, buffered jobs,
and parked jobs. Job accounting information is not affected.
Note: Delete Now is the factory default setting.
Prints a list of all stored job statistics or deletes the information from the printer hard
disk
Notes:
•
A printer hard disk must be installed in the printer and operating properly for
this menu item to be available.
•
Selecting Print prints a list of statistics.
•
Clear deletes all job statistics stored on the printer hard disk.
•
The Clear selection will not appear if Job Accounting is set to MarkTrack
using NPA.
Assists in isolating the source of a print job problem
Notes:
• When Activate is selected, all data sent to the printer is printed in hexadecimal
and character representation, and control codes are not executed.
• To exit or deactivate Hex Trace, turn the printer off or reset the printer.
Provides an estimate of the percentage coverage of toner on a page. The estimate is
printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
119
TM