Setting Up The Printer Software - Lexmark C736 series User Manual

Additional printer setup
Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the up or down arrow button until
4
Press the up or down arrow button until
Note: If an optional internal print server is installed, Print Network <x> Setup Page appears.
5
Check the first section on the network setup page, and confirm that Status is "Connected."
If Status is "Not Connected," the LAN drop may not be active, or the network cable may be malfunctioning. Consult
a system support person for a solution, and then print another network setup page.

Setting up the printer software

Installing printer software
A printer driver is software that lets the computer communicate with the printer. The printer software is typically
installed during the initial printer setup.
For Windows users
1
Close all open software programs.
2
Insert the Software and Documentation CD.
3
From the main installation dialog, click Install Printer and Software.
4
Follow the instructions on the computer screen.
For Macintosh users
1
Close all open software applications.
2
Insert the Software and Documentation CD.
3
From the Finder desktop, double-click the printer CD icon that automatically appears.
4
Double-click the Install Printer and Software icon.
5
Follow the instructions on the computer screen.
Using the World Wide Web
1
Go to the Lexmark Web site at www.lexmark.com.
2
From the Drivers & Downloads menu, click Driver Finder.
3
Select your printer, and then select your operating system.
4
Download the driver and install the printer software.
.
Reports appears, and then press
Network Setup Page appears, and then press
.
.
34