Printing Photos From A Pictbridge-Enabled Digital Camera; Printing Information Pages - Lexmark C736 series User Manual

Printing
3
Press the up or down arrow button until
Note: Folders found on the flash drive appear as folders. File names are appended by the extension type (for
example, .jpg).
4
Press to print one copy, or enter the number of copies using the keypad, and then press
job.
Note: Do not remove the flash drive from the printer until the document has finished printing.
If you leave the flash drive in the printer after leaving the initial USB menu screen, you can still print .pdf files from
the flash drive as held jobs.
Printing photos from a PictBridge‑enabled digital camera
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with your camera.
2
Insert the other end of the USB cable into the USB port on the front of the printer.
Notes:
• Make sure the PictBridge‑enabled digital camera is set to the correct USB mode. For more information, see
the camera documentation.
•
If the PictBridge connection is successful, then a confirmation message appears on the printer display.
3
Follow the instructions on the camera to select and print photos.
Note: If the printer is turned off while the camera is connected, then you must disconnect and then reconnect the
camera.

Printing information pages

Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the up or down arrow button until
appears next to the document you want to print, and then press
.
Reports appears, and then press
to initiate the print
.
72
.