Static Ip; Bt Business Broadband Voice - BT Business Total Broadband Fibre User Manual

BT Hosted VoIP
For more phone lines and advanced call management, you can upgrade to
BT Hosted VoIP. To find out more, please go to www.bt.com/bthostedvoip
Call quality and emergency calls
Call quality may not match that of a normal landline and may vary depending on
internet traffic and customer usage.
Access to emergency services is provided, but calls, including emergency calls to
999 or 112, made via BT Business Broadband Voice, may not work if there's a
power or broadband connection failure. These failures may be caused by reasons
outside our control. Location information, provided to the emergency services, is
limited to the location details associated with your primary business phone billing
address – this may not be where the call was originated. For these reasons, we
strongly recommend that you keep a primary telephone line for contacting the
emergency services.

Static IP

You may have ordered multiple Static IP with your BT Business Total Broadband Fibre
service. If not, you can subscribe using Your account at www.bt.com/business/login.
The BT engineer should set up your multiple Static IP addresses after installing your
new Fibre Hub. If you need to install a replacement Hub in the future, please follow
these steps to set up your multiple Static IP addresses:
open your web browser, type http://home (for your Fibre Hub Manager) in the
1
address bar and press
click on the Broadband
2
scroll down to the Public IP Address
3
in the Router Address
4
in the 'welcome' emails or letters we sent when you ordered Static IP); in the
Subnet Mask field, enter your subnet mask address as follows: if you have 5
Static IP addresses enter 255.255.255.248, if you have 13 Static IP addresses
enter 255.255.255.240
16 Extra features
Enter or your return key
icon then Link Configuration
section and select
field, enter your Fibre Hub address (see 'router address'
Enable