BT Business Total Broadband Fibre User Manual page 20

Select Settings, then LAN, followed by
3
For the required device, select
4
Assignment and Public from pool: 217.37.237.72
Click Save before you close the window. You may be asked to enter your
5
password – if you haven't changed it, the default password is the same as the
serial number on the bottom of your Fibre Hub.
IMPOrTANT: each time you change these settings, you'll need to:
1 click Save to save your new settings. You may be asked to enter your
password – if you haven't changed it, the default password is the same
as the serial number on the bottom of your Fibre Hub
2 release and renew the IP address of the computer to allow it to receive the
new public Static IP address
To renew the IP address:
1 click the Start button, then select run
2 type cmd in the dialogue box, then click OK
3 an MS DOS window will appear – type in ipconfig/release and press Enter
4 you'll see a number of lines of text and the prompt will appear again –
type in ipconfig/renew and press Enter
5 your public Static IP addresses will be listed
6 when you've finished, close the MS DOS window
Your Fibre Hub's firewall will continue to protect the computers assigned to the
public Static IP address. You may have to open specific ports if you plan to host
certain applications.
18 Extra features
NAT & Address
Public (select WAN IP Mapping)
for WAN IP Mapping.
Allocation.
for Address