BT Business Total Broadband Fibre User Manual page 19

click Save before you close the window. You may be asked to enter your password
5
– if you haven't changed it, the default password is the same as the serial number
on the bottom of your Fibre Hub
Once you've set up your multiple Static IP addresses, you can use one of the
following methods to assign your LAN computers to your public Static IP addresses.
Set the IP Address of the computer via the computer
If your Fibre Hub's address is 217.37.237.78 and the subnet mask is
1
255.255.255.240, manually change the computer's TCP/IP settings from
Obtain an IP address automatically
Enter the IP Address you wish to set the computer to (e.g. 217.37.237.65) and
2
the Subnet mask to 255.255.255.255.0, the Gateway to
and the DNS Server to 217.37.237.78.
Renew the IP address of the computer as shown below. Your Fibre Hub
3
automatically detects the Static IP and removes the IP address from the public
Static IP DHCP pool.
Set your Fibre Hub to always provide the same Static IP address
Keep the computer in DHCP mode.
1
Open your web browser, type http://home (for your Fibre Hub Manager) in the
2
address bar and press
Select Settings, then LAN, followed by
3
For the required device, select
4
Assignment and Public Fixed: 217.37.237.73
Click Save before you close the window. You may be asked to enter your
5
password – if you haven't changed it, the default password is the same as the
serial number on the bottom of your Fibre Hub.
Set your Fibre Hub to provide any available Static IP address
Keep the computer in DHCP mode.
1
Open your web browser, type http://home (for your Fibre Hub Manager) in the
2
address bar and press
to Use the following IP
Enter or your return key.
NAT & Address
Public (select WAN IP Mapping)
Enter or your return key.
address.
217.37.237.78
Allocation.
for Address
for WAN IP Mapping.
Extra features 17