Table of Contents
Advertisement
BACKUP
MANUAL BACKUP
Back up recorded data on a CD-RW, DVD-RW or connected USB device.
Tip
Refer to the list of Approved USB Flash Drives in the Introduction chapter.
1.
Press BACKUP on the front panel or remote control
and log in.
2.
Insert media.
3.
Select TARGET media.
Caution If you are using a new USB device to back up your
data, you must format it first as FAT32.
4.
Set FROM and TO date and time.
5.
Select CHANNELS to include in backup.
6.
Select ESTIMATE to display estimated data size and
free space available.
Note
ESTIMATE must be selected before selecting the WRITE function. If any backup parameters are changed (Date,
Time, Channels) you must select ESTIMATE again.
7.
Select WRITE to start backup.
Caution Do not shutdown the system during the backup process.
AUTO BACKUP
Create a mirrored backup of recorded data on a connected USB external hard drive.
Caution OpenEye recommends the use of hard drives only; the use of flash drives is not recommended for auto backup.
1.
Press BACKUP on the front panel or remote control
and log in.
2.
Select TYPE and press ENT to select AUTO BACKUP.
3.
Connect a USB drive to the DVR.
4.
Select USB TARGET.
5.
Set OVERWRITE ON if you want to write over previous
data on the USB device.
6.
Enter a TITLE for the backup file.
7.
Select CHANNELS to include in backup.
8.
Select START to start backup.
Caution Do not shutdown the system during the backup process.
27717AN
BACKUP
TYPE
MANUAL BACKUP
TARGET
USB
FROM
07/05/2007 12:55:47
TO
07/17/2007 13:30:03
CHANNEL
ALL
RECORDING START TIME
2007/07/05 10:00:00
RECORDING END TIME
2007/07/17 09:59:59
REQUIRED SPACE
0.00MB
FREE SPACE
NONE
ESTIMATE
WRITE
EXIT
BACKUP
TYPE
AUTO BACKUP
USB TARGET
NONE
OPTION
OVERWRITE OFF
TITLE
dvr
CHANNEL
ALL
FREE SPACE
NONE
STATUS
NOT RUNNING. . .
START
EXIT
USB FORMAT
HELP
STOP
45
Advertisement
Table of Contents
