Table of Contents
Advertisement
SPOT Setup
The SPOT Setup display allows the user to define the sequence display for individual Spot Monitors. This allows users to use
different Spot Monitors to display only the video necessary for the person watching the Spot Monitor.
Sequence – ON/OFF [sequences through selected cameras.]
Interval – 1 ~ 60 seconds [Set the sequence interval time.]
Channel – Select cameras to include in sequence.
Record Setup
Frame Setup
Day/Night/Weekend – Adjust the PPS and picture quality for each schedule individually.
[C] PPS – 0 ~25 [Define a global PPS setting for continuous recording or set individually for each channel.]
[M] PPS – 0 ~25 [Define a global PPS setting for motion/event recording or set individually for each channel.]
Record Mode – Continuous / Motion Event / C/M/E[ALL] /N/A
Quality – Low / Normal / High / Ultra [Define a global quality setting or set individually for each channel.]
Post Recording – 0 99 seconds [Recording time after event.]
Continuous Frame –Displays the actual PPS / maximum PPS for continuous recording
Event Frame – Displays the actual PPS / maximum PPS for event recording.
Schedule Setup
Night – Set night time (ex. If 18:00 to 6:00 is defined as night time, 6:00 to 18:00 is defined as day time)
Weekend –Define weekend days
Audio Setup
Specify volume level and audio settings for recording according to preset schedules and live or playback mode.
Audio Day – Enable/Disable
Audio Night – Enable/Disable
Audio Weekend – Enable/Disable
Audio Live – Enable/Disable
Audio Playback – Enable/Disable
Volume – 0 ~14
27717AN
57
Advertisement
Table of Contents
