Table of Contents
Advertisement
Quick Backup in Search Mode
You can easily archive video while watching a video playback.
Note:
In the search mode:
1.
Press the BACKUP on the front panel to set the Start time. You will see S [Date/Time of
clip] in right bottom of the playback monitor.
2.
Continue video playback until you reach the end of the desired clip.
3.
Press the BACKUP again to set the end time. The backup menu will open and you can
select the backup media (CD/DVD OR USB thumb drive) and complete the backup.
Express Search
Select a specific date and time to search for recordings:
1.
On the hover menu, click MENU, and then click SEARCH.
2.
Click EXPRESS SEARCH.
3.
Click a date on the list.
4.
Click the appropriate set of channels and then move the white vertical line indicator to
select a specific time for searching.
5.
Click PLAY.
6.
Use the playback controls to view the video.
Event Search
Use the Event Search to find particular events.
The 11 most recent events display on the first Event Search/Log page. Click the arrows at the
top of the screen to view the remianing entries for each date. You can filter the log results by
SENSOR, MOTION, VIDEO LOSS, and DISK FULL.
Write the Event log to a CD/DVD or connected USB device in text file format:
1.
Insert a CD/DVD, or connect a USB device to the recorder.
2.
Click SCAN, and then click EXPORT to copy the log information to the CD/DVD or USB
device.
3.
The Event Log is saved in a dated folder as a system.log file.
Jump to First Saved Data
Go to the first frame of the recorded data. This is the oldest image recorded.
Jump to Last Saved Data
Go to the last frame of the recorded image. This is the latest image recorded.
62
The Quick Backup is only available using the BACKUP button, provided on the 16
CH E-Series Slim recorder. 4 and 8 channel models do not provide this function.
Dates with an asterisk contain recorded video data.
Advertisement
Table of Contents
