Troubleshooting; Environmental Specifications - OpenEye OE2-E12016 User Manual

E-series digital video recorder
Hide thumbs Also See for OE2-E12016:
Table of Contents

Advertisement

Network
Q.
Does the E-Series support dynamic IP?
A.
Yes. Enable DHCP in Network Setup
Q.
E-Mail is not being sent.
A.
Please check all the setting in the Network E-Mail Setup.
Miscellaneous
Q.
What types of cameras can be used?
A.
The OpenEye E120 DVR supports either NTSC or PAL analog cameras. Both standards may not be used
simultaneously.

TROUBLESHOOTING

Problem
No Power
No Live Video
Live Video Too Bright
DVR has stopped
recording

ENVIRONMENTAL SPECIFICATIONS

68
Possible Solutions
Check the power cord connections
Check power at the outlet
Ensure the power switch on the rear of the DVR is turned on.
Check camera video cable and connections
Check monitor video cable and connections
Check camera power
Check camera lens setting
If a cable is attached to the video channels looping output, make sure that it is properly terminated
The HDD is full , delete video or set the DVR Overwrite Mode to On in HDD Management
Operating Temperature
Storage Temperature
Operating Relative Humidity
Storage Relative Humidity
0 – 40C
0 – 40C
0 – 90% (non-condensing)
0 – 90% (non-condensing)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oe2-e12008Oe2-e12004

Table of Contents