Quick Start Guide - OpenEye OE2-E12016 User Manual

QUICK START GUIDE

1. Turn on the DVR.
Note See the Turning on the DVR section for more details.
2. Log in -- Use the number buttons to enter the password when prompted – By default the password is <none> – Press
the ENT Button.
3. Complete System Setup to set up the date, time and system ID.
Note See the System Startup section for more details.
Complete Sensor Setup to enable any external devices connected to sensor inputs or relay outputs.
Note See the Motion/Event Setup section for more details.
4. Complete Disk Management Setup to set overwrite options and enable SMART Check.
Note See the Disk Management section for more details.
5. Complete User Management Setup to change the Admin password and add additional users.
Note See the User Management section for more details.
6. Complete Camera Setup for all attached cameras.
Note See the Camera Setup section for more detail.
7. Complete PTZ Setup for any attached Pan / Tilt / Zoom cameras.
Note See the PTZ Setup section for more details.
8. Create a recording schedule.
Note See the Record section for more details.
9. Complete Input Setup to trigger recording on an event: motion, sensor, video loss.
Note See the Motion/Event Setup section for more details.
10. The DVR is now configured to record, search and playback video.
Note See the Operations section in this manual for more information on using the DVR.
27717AN 15