Rx Dg-Id; Tx Dg-Id; Tx Power; Step - Yaesu ADMS-16 Instruction Manual

• RX DG-ID

Select the receiving DG-ID number.

• TX DG-ID

Select the transmitting DG-ID number

• Tx Power

This item selects the TX Power.

• Step

Sets the channel step for receiving channels.

• Narrow

By ticking the checkbox of this item, switches to the Narrow FM mode.

• Clock Shift

When an internal spurious signal occurs due to the microcomputer clock, turn this setting on (tick the
checkbox). This may improve the situation.
Usually, this item is set to "OFF" (un-tick the checkbox).

• Comment

Comments may be added to the registered memory channels. Up to 255 letters can be used. This function
is useful in organizing the memory channels by, for example, applying a category name to each channel.
These comments are not transferred to the FTM-500DR/DE.
26