Update Software - SMART MX52 User Manual

 Mark one timer (1-8) that you want to edit.
 The following selection options are available in the line Timer Type:
Off
once
daily
weekly
yearly
Select in the line Recording mode the event type Off, Notification, Channel or On.
Off
Notification
Channel
On
Additionally there is a value Recorder, which is not used with your MX52.
 In the line Channel chose the desired channel.
 In the line Date set the desired date.
 In the line Time set the desired start time.
Channels marked in the EPG can be directly added to your
event timer. This reduces the time-consuming programming of
the date and time.
6.6

Update software

In the line Update Software you can play current updates from your USB data
medium on the receiver.
 Search for the update file on the internet page www.smart-electronic.de
(Menu item Support) and save this on to a USB data storage medium and
unzip it if necessary.
smart MX52
Timer is deactivated
to specifically program an event
to program an event at the same time every day (e. g. the to
switch to the news every day)
to program an event on the same week day every week (e.g.
a message about the start of a series which is broadcast at
weekly intervals)
to program an event on the same day every year.
If the set time has been reached the receiver switches itself
off  sleep timer.
If the set time has been reached you will be informed with
an onscreen message.
If the set time has been reached the receiver will switch to
the programmed channel.
If the set time has been reached the receiver switches itself
on.
Settings
47