Connecting Satellite Antenna; Connecting The Tv Set; Connecting The Home Cinema System; Inserting Or Changing Batteries Of The Remote Control - SMART Joy S2 User Manual

optional connection
4.1

Connecting Satellite Antenna

Connect the antenna cable to the receiver connection LNB IN.

4.2

Connecting the TV set

 Connect the TV set to the receiver connection TV with a Scart cable.
4.3

Connecting the home cinema system

To improve audio playback, you can connect to your receiver - additionally to the TV set - also a
multichannel home cinema system or a hi-fi system (if your home cinema system can process digital
audio data SPDIF):
 Connect the home cinema system to the receiver connection DIGITAL AUDIO with a suitable
cinch cable.
4.4

Inserting or Changing Batteries of the Remote Control

This describes the steps for inserting new batteries of the remote control or for replacing
empty batteries:
1. Open the battery compartment on the bottom side of the remote control. Remove the cover of the
battery compartment
2. Place the two batteries 1.5 V (type: AAA). Ensure correct polarity!
3. Close the battery compartment
 Replace the batteries if certain remote control functions are not performed any

 When replacing batteries, always ensure that all batteries are replaced.
5

Basic Operation

This chapter describes the required steps to be able to use the offer of radio and TV channels provid-
ed via satellite.
5.1

Switching on the Receiver

1. Switch on all connected devices.
2. Ensure that the correct AV input is selected at the TV set (i.e. that the signals from the receiver
are displayed).
3. Ensure that the correct audio input is selected at the connected home cinema or hi-fi system.
4. Connect the mains plug to the power outlet to switch on the receiver.
more or are performed incorrectly.
.
Basic Operation
11