Using The Device Manager; Navigating The Screens - GE MDS SD Series Technical Manual

36

6.0 USING THE DEVICE MANAGER

The radio contains a built-in management system known as a Device
Manager. This web-based tool is accessed with a PC connected to the
radio's Ethernet port as shown in Figure 25. It offers an intuitive method
for managing your radio and performing common maintenance tasks.
NOTE: The Device Manager is the preferred method for managing the
transceiver. Menu-based Serial or Telnet management is also
possible. Refer to the SD Serial/Telnet Management Supple-
ment, Part No. 05-6193A01 for details.
If you are using the Device Manager for the first time, refer to "Web
Browser Connection" on Page 30 for instructions on connecting a PC to
the radio and logging into the Device Manager for basic radio setup,
including use of the Setup Wizards.
Figure 25. PC Connection to Radio for Web Management

6.1 Navigating the Screens

Upon login to the Device Manager, the
shown in Figure 26. The selection pane at the left side of this screen pro-
vides access to any of the available screens. Simply click an item of
interest, and the new screen appears. Sub-level screens are displayed
under the main heading, and may be clicked to open them.
With a desired screen displayed, simply scroll up or down to reach a
required setting or indication. Drop-down boxes or blank fields are pro-
vided for entering new information. Once a new parameter is entered,
click
Commit Configuration
setting, or select
Undo
SD Series Technical Manual
Overview
on the right-hand side of the screen to apply the
to cancel it.
screen appears as
MDS 05-4846A01, Rev. H