Maintenance & Status Screen; Event Log - GE MDS SD Series Technical Manual

MDS 05-4846A01, Rev. H
6.4 Maintenance & Status Screen
The
Maintenance & Status
tools used in testing the radio and performing routine management tasks.
Individual screens may be selected beneath
side of the screen.
Figure 39. Maintenance & Status Screen

Event Log

The Event Log is used to display all events stored by the transceiver,
even if the radio has been power-cycled. It also shows a running total of
the alarms stored.
•
Total Event Log Events
been logged by the transceiver. To view the Event Log, click
. The listed events can be cleared by clicking
Log
will be challenged by a caution message to verify that you intend
to clear the event log.)
• —Displays a detailed listing of each event.
Show Log
• —Erases the stored listing of events.
Clear Log
• —Used to save the log data as a text file in the desired
Export Log
location on the PC.
SD Series Technical Manual
screen (Figure 39) provides access to several
Maintenance & Status
—Displays the number of events that have
at the left
Show
. (You
Clear Log
73