Basic Device Information; Starting Information Screen - GE MDS iNET 900 Reference Manual

32
NOTE: In the menu descriptions that follow, parameter options/range,
and any default values are displayed at the end of the text
between square brackets. Note that the default setting is
always shown after a semicolon: [
default setting

2.3 BASIC DEVICE INFORMATION

This section contains detailed menu screens and settings that you can
use to specify the behavior of the unit.

2.3.1 Starting Information Screen

Once you have logged into the Management System, you will be pre-
sented with a screen that provides an overview of the transceiver and its
current operating condition. It provides an array of vital information and
operating conditions.
Figure 2-9. Starting Information Screen
• —Current operating mode of the unit as it relates to
Device Mode
the radio network.
• —This is a user-defined parameter that will appear
Device Name
in the heading of all pages.
(To change it, see Network Configuration Menu on Page 37.)
NOTE: Do not use a colon (:) or percent (%) symbol in the device
name.
•
Network Name
is associated [
• —Unit's IP address [
IP Address
• —Condition of the unit's association with an
Device Status
Access Point.
At the Access Point:
iNET Series Reference Manual
]
—The name of the radio network in which the unit
;
9 to 15 characters Not Programmed
192.168.1.1
available settings or range;
].
]
05-2806A01, Rev. J