MDS 05-4846A01, Rev. H
4.1 Chassis Dimensions
Figure 12 shows the external chassis dimensions of the SD Transceiver.
Figure 12. Transceiver Dimensions
4.2 Mounting Bracket Options
The transceiver is normally provided with flat mounting brackets
attached to the bottom of the radio as shown in Figure 13. An optional
35 mm DIN rail mounting bracket is also available, and is described
below.
Figure 13. Mounting Bracket Dimensions
NOTE:
To prevent moisture from entering the radio, do not mount the case
with the cable connectors pointing up. Also, dress all cables to
prevent moisture from running along the cables and into the radio.
SD Series Technical Manual
Invisible place holder
Invisible place holder
6.675˝ (16.95 cm)
19