GE MDS SD Series Technical Manual page 84

I/O Statistics
Ethernet Statistics
76
This screen allows viewing transmitted and received bytes on any of the
transceiver interface modules.
• —The drop-down box to the right of this area allows
Module Select
selection of any of the transceiver interface modules:
,
Access Controller
. Once a module is selected, click
Reprogram
summary of TX and RX bytes, along with the number of packets
missed, retries, and number of blocks (as applicable, depending
on the interface selected). The display continually refreshes to
show the latest information, and may be cleared at any time by
selecting
Clear Module Statistics
• —Clicking this button restores the previous
Reset
tion. If you've scrolled to a new module selection in the pull-down
box, and wish to return to the previous one, simply click this but-
ton to restore it.
This screen presents a detailed summary of packets received and trans-
mitted, dropped packets, errors, overruns of the buffer, RX data rate
(bps), and RX/TX data for Unicast, Multicast, and Broadcast transmis-
sions.
• —Clicking this button resets the displayed statistic
Clear Statistics
counts.
SD Series Technical Manual
, , ,
Port(s) COM1 COM2 IP Payload Port 1
.
,
All Media
, , ,
2 3 Remote
to view a
Set Module
selec-
Set Module
MDS 05-4846A01, Rev. H