GE MDS SD Series Technical Manual page 47

MDS 05-4846A01, Rev. H
Table 11. Device Manager Quick Reference (Continued)
Task
If you wish to...
Category
Set RF Output Power, Modem Type, RX/TX
Frequency
View/Set Soft-Carrier Dekey status, RX/TX
Time-Out options
View/Set Data-Key and RTS-Key settings
(ON/OFF)
View/Set Push-to-Talk/Clear-to-Send Delay
times (ms)
View/Set Automatic Frequency Correction
(AFC) setting
View/Set Switched Carrier ON/OFF setting (B
Modems)
Configure Listen-Before-Transmit (LBT)
collision avoidance
View Received Signal Strength (RSSI) level
Key the radio transmitter, view power output
View local radio emissions to locate possible
interference sources.
SD Series Technical Manual
Refer to this Screen/Section
Configuration>>Radio,
Basic Settings, Page 43
Configuration>>
Radio>>
Advanced Settings, Page 53
Configuration>>
Radio>>
Advanced Settings, Page 53
Configuration>>
Radio>>
Advanced Settings, Page 53
Configuration>>
Radio>>
Advanced Settings, Page 53
Configuration>>
Radio>>
Advanced Settings, Page 53
Configuration>>
Features>>
LBT Settings, Page 57
Maintenance & Status>>
Performance, Page 75
Maintenance & Status>>
Radio Test>>
RF Keying Test, Page 79
Maintenance & Status>>
Radio Test>>
Spectrum Graph, Page 79
39