GE MDS SD Series Technical Manual page 54

Device Settings
46
Figure 29. System ID Example—Invalid Arrangement
(Will not operate properly with SD Transceivers)
•
Owner Name/Owner Message
entered for the radio for informational purposes. These are
"free-form" fields which do not affect the operation of the radio
in any way. Such fields might be used to identify the network
administrator/company name, and include a site-specific message
(i.e.,
Unit 2 at North Tower site
may be entered (there is no minimum), and any printable charac-
ters may be used.
• —Sleep Mode places the transceiver into a "hiber-
Enable Sleep
nated" low power state, with a nominal current draw of less than
12 mA (at 13 Vdc). "Wake-up" time is approximately 50 milli-
seconds. Sleep Mode is often used at battery/solar-powered
remote sites to conserve power. An active low on Pin 4 of the
SD Series Technical Manual
Invisible place holder
—An owner name and message may be
). Up to 30 alpha-numeric characters
MDS 05-4846A01, Rev. H