GE MDS SD Series Technical Manual page 48

40
Table 11. Device Manager Quick Reference (Continued)
Task
If you wish to...
Category
View Serial No., Model 1 (software), Model 2
(hardware) version, Firmware Version, Build
Date
Set Owner Name/Message, enable/disable
Sleep Mode, set COM LED mode, Radio Mode
Configure time delays to identify packets on
serial ports
Configure Media Access Control (MAC) settings
Configure Store and Forward (SAF)
Configure Virtual LAN (VLAN)
Configure Terminal Server 1/2
View Unit ID and/or DLINK diagnostics settings
Set Password for radio
Set Device Security (enable/disable local login
requirement, enable/disable Telnet access,
enable/disable web access)
Set Wireless Security parameters (Encryption
on/off, DLINK Security on/off, Encryption
Phrase, DLINK Encryption Phrase)
Configure the IP settings (Static IP Address,
Static IP Netmask, Static Default Gateway,
DHCP enable/disable, Virtual Radio
Channels–VRCs)
Configure Ethernet Bridging, enable/disable
Bridge Filtering
Configure the IP Payload settings
(Enable/disable port, set mode, Local IP Port,
Destination IP Address, Destination IP Port)
SD Series Technical Manual
Refer to this Screen/Section
Overview>>
SD Summary, Page 37
Configuration>>
Radio>>Device Settings,
Page 46
Configuration>>
Radio>>
Packet Settings, Page 48
Configuration>>
Radio>>
Media Access Control>>
Settings, Page 48
Configuration>>Radio>>
Media Access
Control>>Page 48
Configuration>>Features>>
VLAN Config., Page 55
Configuration>>Features>>
Term Srvr COM1/2 Config.,
Page 61
Configuration>>
Radio>>
Diagnostic Settings,
Page 52
Configuration>>
Security>>
Login Password, Page 71
Configuration>>
Security>>
Device Security, Page 70
Configuration>>
Security>>
Wireless Security, Page 71
Configuration>>
Security>>
Encryption Phrase, DLINK
Encryption Phrase, Page 72
Configuration>>
Communication Ports>>
IP Configuration, Page 69
Configuration>>
Features>>
Bridge Configuration,
Page 55
Configuration>>
Features>>IP Payload 1, 2,
3, Page 58
MDS 05-4846A01, Rev. H