Suppress Digits; Twinning; User Blf - Avaya 9600 Series User Manual

16.20 Suppress Digits

Masks the display of digits as you dial them on the phone. Dialed digits are replaced with an s character. The button is
used to switch the suppression on/off. When 'suppress digits' has been set, the button's red lamp is lit. Pressing the
button again cancels the suppression.
· If en-block dialing is active you will see the digits as you dial them. When you make the call the digits will be
26
suppressed.
· When the option to suppress digits is used, the call is not recorded in the call log.

16.21 Twinning

A button configured for this feature allows you to control your phone's mobile twinning operation. This is only useable if
your system administrator has configured you for mobile twinning.
· If pressed when the phone is idle, the phone displays the
switch mobile twinning on/off and to setting the twinned destination.
· If pressed while a twinned call is connected to the twinned destination, the system attempts to reclaim the call.
· If pressed while connected to a call on the phone, the system attempts to transfer the call to the twinned
destination. You do not need twinning switched on to use this feature.

16.22 User BLF

This type of button can be used to monitor the status of another user. The lamp's state will indicate the status of the
user.
· Off = Available
Pressing the button will make a call to the user. In addition to calling the user, you can use the user button to
transfer calls to the user or to start a conference with the user.
· Slow Flash = Ringing
Pressing the button will display options to pickup the call.
· Fast Flash = On a Call
Pressing the button will display a number of options:
· Call - Call the user.
· Message - Cause a single burst of ringing on the user's phone. They will also see the message "Please Call"
followed by your extension number.
· Voicemail - Call the user's voicemail mailbox to leave a message.
· Auto Callback - Set an automatic callback on the user. The callback will occur when the user ends their
current call.
The following options are only available if configured for you by your system administrator:
· Drop Call - Disconnect the user's current call.
· Acquire - Seize the user's current call.
· Intrude - Join the user's current call, turning it into a conference call.
· Listen - Start silent monitoring of the user's call.
9600 Series User Guide
IP Office 9.0
mobile twinning menu
94
Button Features: Suppress Digits
. You can use the menu to
Issue 06e (03 February 2014)
Page 107