Input Select Menu Screen; System Menu Screen - JVC BD-X201M Instructions Manual

Setup Menu

INPUT SELECT MENU Screen

The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
INPUT SELECT [LINE] This parameter is used to select the audio and video input signals.
Y/C LINE : The composite video signal from the VIDEO LINE IN terminal and the analog
DV audio signals from the AUDIO IN terminals are to be used.
Y/C : The YC separate signal from the Y/C IN terminal and the analog audio signals
from the AUDIO IN terminals are to be used.
INPUT [LINE] DV : The digital video and audio signals from the DV IN/OUT terminal are to be used.
YC * The front-panel indicator corresponding to the type of input signal selected on this
dV screen will light up or start to flash.
Setting of this parameter will not be possible when REMOTE SELECT from the
REMOTE MENU screen has been set to DV(SLAVE), or DV(TRIGGER). DV signals
will be used for input at these times
This button is used to return to the Setup Menu screen.
MENU
MENU

SYSTEM MENU Screen

The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
SYSTEM MENU (1/2) screen
Parameter Possible settings
This parameter is used to indicate whether or not a setup signal is to be added to analog
SETUP OFF
video (i.e., composite or YC separate) during the recording process. The actual setting depends
[ON]
on whether the input analog signal contains a setup signal. (NTSC ouly)
OFF : This setting should be made when the input analog signal does not contain
a setup signal.
SETUP oFF
ON : This setting should be made when the input analog signal contains a setup signal.
[oN]
This parameter is used to indicate whether or not the color bar output by the DVD
TEST SIGNAL [OFF]
recorder's internal signal generator is to be displayed.
ON
OFF : The color bar is not displayed and video from the VIDEO LINE IN terminal is
output to the monitor.
TEST S [oFF]
ON : The color bar is displayed. Use this setting when the color bar is to be recorded.
oN
This parameter is used to indicate whether or not all setup menu parameters are to
FACTORY [CANCEL]
be returned to their default settings.
SETTING EXECUTE
CANCEL
FACTRY [CAN] EXECUTE : Default settings are to be restored. However, the current set values for
EXE
Note
The system must be restarted after this parameter is changed.
KEYBOARD [ENGLISH]
This parameter is set when using a USB keyboard, and its purpose is to indicate the
STYLE FRENCH keyboard's layout (or language) as one of the following.
ITALIAN ENGLISH
GERMAN FRENCH
SPANISH ITALIAN
JAPANESE
GERMAN
SPANISH
KboARd [ENG]
JAPANESE
FRN
Note
ITL The system must be restarted after this parameter is changed.
GER
ESP
JPN
62
Description
Description
: Default settings are not to be restored.
the TV TYPE item on the SYSTEM MENU (2/2) screen will not be erased.
SYSTEM MENU Screen (continued)
Parameter Possible settings
PLAY BACK [DVD] For selecting whether to set DVD playback actions and display of a title's elapsed
&232C TYPE VTR time /index number to the VTR or DVD mode. Actions via RS-232C control will vary
accordingly with this setting. Please see the following table for details.
232C [dVd]
VTR
Action
Playback
Playback till end point of the last Searches and stops at the point
title. that is 3 seconds prior to the end
point.
Index Search Accepts index of points that exist
in the disc.
STOP Operation in Stop Mode Resume data will not be cleared.
(Unfinalized Discs)
LCD / Onscreen
Elapsed Time Display of a Title Displays total time as accumulated
from the first title.
Index Value Display Displays
accumulated from the first title.
[Range: 0 - 9801]
This button displays the total time for recording and erasing operations. (xHour xxMin)
TOTAL RECORDING TIME —
— —
∆ This button is used to display the SYSTEM MENU (2/2) screen.
SYS2
This button is used to return to the Setup Menu screen.
MENU
MENU
Description
When Set to VTR When Set to DVD
Searches and stops at the
beginning of the last title.
Accepts index of points that exist
in the current title.
Resume data will be cleared.
Searches and stops at the
beginning of the last title.
Displays elapsed time of the current
title.
total number as Displays index value of the current
title. [Range: 0 - 99]
63