Basic Operation; I Power On; I Channel Selection - Icom IC-A110EURO Instruction Manual

I Power ON

q Push [POWER] to turn power ON.
w Operate the transceiver as indicated in the following sec-
tions.
e Select the desired memory channel (or VFO frequency)
with the [V/M] keys.
• When receiving a signal,
ted from the speaker.
• Further adjustment of audio level may be necessary at this point.
• Push [SQL] to adjust the squelch level. (p. 6)
• Push and hold the tuning dial for 1 sec. to select the [TS], each
push increments/decrements to the frequency are either 10 kHz
or 1 MHz. (p. 7)
r Push and hold [PTT] to transmit, then speak into the mi-
crophone.
• Transmit indicator lights.
t Release [PTT] to receive.
appears and audio is emit-

BASIC OPERATION

I Channel selection

ï VFO/Memory selection
q Push [V/M] to select memory
mode or VFO mode.
➥ Rotate the dial to select a de-
sired frequency/channel.
w During memory mode opera-
tion, push [V/M] key to trans-
fer the memory contents to
VFO.
• Push [V/M] to select VFO
mode.
NOTE: Only frequency data is transferred even if the
memory channel has a memory name.
ï External speaker output control
External speaker output can be turned OFF, if desired.
q Push and hold [SQL] for 1 sec.
w Rotate the dial to select "SP OFF".
e Push [SQL] to turn to the previous mode.
NOTE: This function avail-
able both internal and exter-
nal speakers.
2
4