Other Functions; I Initial Set Mode; D Memory Names - Icom IC-A110EURO Instruction Manual

I Initial set mode

Initial set mode is accessed at power ON and allows you to
set seldom-changed settings. In this way you can "customize"
transceiver operations to suit your preferences and operating
style.
D Entering initial set mode
q While pushing and holding [V/M] + [TS(DIAL)], push
[POWER] sw to turn power ON.
• The transceiver enters initial set mode and "MN", "BP", "ST" or
"PR" (p. 11) appears on the display.
w Push [TS(DIAL)] to select the
desired item as described
below and at right.
e Turn [DIAL(TS)] to select the
desired condition.
r Push [SCAN] to exit initial set
mode and select the previous
operating mode.

D Memory names

This item allows you to display a memory name instead of fre-
quency.
• When a memory channel has not been programmed with
a name, frequency indication appears instead.

OTHER FUNCTIONS

D Beep tones ON/OFF
Confirmation beep tones nor-
mally sound when you push a
key. These can be turned ON or
OFF as you prefer.
D Side tones ON/OFF
When using an optional headset
such as those from the David
Clark Co. via the adapter, the
transceiver outputs your trans-
mitted voice to the headset for
monitoring.
Optional
• OPC-871 HEADSET
is required
ADAPTER .
5
10