Memory Programming; I Programming A Memory Channel - Icom IC-A110EURO Instruction Manual

I Programming a memory
channel
The transceiver has 20 memory channels for storage of often
-used frequencies.
q Push [V/M] to select VFO
mode, if necessary.
w Turns the [DIAL] to select the
desired frequency.
• Push [DIAL/TS] one or more
times to use the dial select
function, if desired.
e Push [V/M] for 5 sec. to enter
memory programming mode.
• " " and memory channel
number appear.
r Turn the [DIAL] to select the
desired memory channel
number.
t Push [V/M] for 1 sec. to pro-
gram the information into the
channel and return to VFO
mode.
• Push [SQL] for 1 sec. to clear
the memory information.

MEMORY PROGRAMMING

D Setting lockout channels
In order to speed up the scan interval, you can set memory
channels you don't wish to be scanned as lockout channels.
q Push [V/M] to select memory mode, if necessary.
• " " appears.
w Turn the [DIAL] to select a memory channel to set as a
lockout channel.
e Push [SCAN] for 5 sec. to toggle the lockout setting
ON/OFF.
• "LOCK OUT" appears when the
channel is set as a lockout
channel.
NOTE: The VFO/memory switch [V/M] and the memory
write switch [M/W] functions may not be available de-
pending on version.
4
Memory channel 8 is set
as lockout channel.
8