Icom IC-A110EURO Instruction Manual
  1. Manuals
  2. Brands
  3. Icom Manuals
  4. Transceiver
  5. IC-A110EURO
  6. Instruction manual
Icom IC-A110EURO Instruction Manual

Icom IC-A110EURO Instruction Manual

Vhf air band transceiver
Hide thumbs Also See for IC-A110EURO:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
VHF AIR BAND TRANSCEIVER
iA110EURO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC-A110EURO and is the answer not in the manual?

Questions and answers

Related Manuals for Icom IC-A110EURO

Summary of Contents for Icom IC-A110EURO

  • Page 1 INSTRUCTION MANUAL VHF AIR BAND TRANSCEIVER iA110EURO...

  • Page 2: Foreword

    DO NOT connect the transceiver to a power source using reverse polarity. This connection will not only blow fuses but Versions of the IC-A110EURO which display the also may damage the transceiver. “CE” symbol on the serial number seal, comply with the essential requirements of the 89/336/EEC direc- tive for Electromagnetic Compatibility.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS DO NOT FOREWORD ................... i place unit in a non-secure place to avoid inad- EXPLICIT DEFINITIONS ................. i vertent use by children. CAUTIONS ....................i TABLE OF CONTENTS ................ii PANEL DESCRIPTION ............... 1 – 3 DO NOT push the PTT when not actually desiring to trans- I Panel description ................

  • Page 4: Panel Description

    PANEL DESCRIPTION I Panel description SCAN q TUNING [DIAL(TS)] e VOLUME UP [Y] DOWN [Z] KEY ➥ Changes the operating frequency; memory channel in Adjusts the audio output level. memory mode; set mode contents in set mode, etc. ➥ Push to toggle the dimmer control OFF, Low and High. r LOUD SPEAKER ➥...
  • Page 5 PANEL DESCRIPTION y SQL SWITCH [SQL] !0 MICROPHONE CONNECTOR ➥ Push to turn on the squelch adjust mode. (p. 6) Connects the supplied microphone or optional. ➥ Push and hold this switch for 1 sec. to turn ON/OFF the NEVER connect other microphones. The pin assignments both internal and external speaker output.

  • Page 6: I Function Display

    PANEL DESCRIPTION I Function display t TX INDICATOR (p. 5) Appears while transmitting. y FREQUENCY DISPLAY (p. 11) ➥Shows the operating frequency. ➥Shows the channel name when the memory name function is selected. (p. 10) u VOLUME LEVEL INDICATORS ➥ Shows the AF volume level(while receiving). i SET MODE INDICATOR ➥...

  • Page 7: Basic Operation

    BASIC OPERATION I Power ON I Channel selection ï VFO/Memory selection q Push [POWER] to turn power ON. q Push [V/M] to select memory mode or VFO mode. ➥ Rotate the dial to select a de- sired frequency/channel. w During memory mode opera- w Operate the transceiver as indicated in the following sec- tion, push [V/M] key to trans- fer the memory contents to...

  • Page 8: I Squelch Function

    BASIC OPERATION I Squelch function I Dial select function The transceiver has a noise squelch circuit to mute undesired Use the dial select function to adjust the tuning behaviour of noise while receiving no signal. the [DIAL] keys—use 1 MHz tuning when you want to change D Setting the squelch level the frequency in large increments;...

  • Page 9: Scan Operation

    SCAN OPERATION I Scan operation • VFO scan Repeatedly scans all q Push [V/M] to select memory mode or VFO mode, if nec- frequencies over the entire lowest highest Start frequency frequency band. Scan step is minimum essary. Scan • “ ”...

  • Page 10: I On-Hook Scan

    SCAN OPERATION I Dualwatch I On–hook scan Dualwatch monitors priority channel while you are receiving On–hook scan (Hanger scan) is available when taking the mi- an other channel (VFO or memory channel). crophone from its hanger (off–hook) and /or returning it into the hanger (on–hook).

  • Page 11: Memory Programming

    MEMORY PROGRAMMING I Programming a memory D Setting lockout channels In order to speed up the scan interval, you can set memory channel channels you don’t wish to be scanned as lockout channels. The transceiver has 20 memory channels for storage of often q Push [V/M] to select memory mode, if necessary.

  • Page 12: I Memory Names

    MEMORY PROGRAMMING I Memory names ï Programming memory names NOTE: Push PTT switch to abort the programming memory name. q Select the memory channel to be programmed: ➥ Push [V/M] to select memory mode. • The following characters can be used in names: ➥...

  • Page 13: Other Functions

    OTHER FUNCTIONS I Initial set mode D Beep tones ON/OFF Confirmation beep tones nor- Initial set mode is accessed at power ON and allows you to mally sound when you push a set seldom-changed settings. In this way you can “customize” key.

  • Page 14: Priority Channel

    OTHER FUNCTION • Setting the priority channel D Priority channel q While pushing and holding [V/M] and [DIAL(TS)], push The priority channel is used to store your most often-used [POWER] to turn the power ON. channel for quick recall. In addition the priority channel is •...

  • Page 15: Connection And Installation

    CONNECTION AND INSTALLATION I Rear panel and connections Antenna › External speaker jack ⁄ ¤ fi OPC-871 HEADSET ADAPTER (Option) ‹ red: , Supplied DC power cable 12 V or 24 V black: . 12 V or 24 V Battery Battery (12 V or 24 V auto- matic selectable.)

  • Page 16: I Mounting

    CONNECTION AND INSTALLATION I Mounting I Supplied accessories Flat washer Spring washer When using self-tapping screws The universal mounting bracket supplied with your transceiver q Microphone ........1. allows overhead or dashboard mounting.

  • Page 17: Cloning

    CLONING D Data cloning D Cloning using PC Cloning allows you to quickly and easily Data can be cloned to and from a PC (IBM compatible) using transfer the programmed contents from one transceiver to the optional CS-A110EURO and the optional CLONING SOFTWARE another transceiver, or, data from PC to a transceiver using OPC-478...

  • Page 18: Specifications

    SPECIFICATIONS D General D Transmitter • Frequency coverage : 118.000 to 136.975 MHz • Output power : 9 W ±1.5dB (+15 to +35˚C) • Channel spacing : 25/8.33 kHz 9 W +2dB, –3dB (–20 to +55˚C) • Mode : AM (6K00A3E) •...
  • Page 19 SPECIFICATIONS (VFO CHANNEL ID LIST) D Receiver • Audio output power : More than 10 W (at 13.75 V DC with 8 Ω load 60 % MOD. 10% • Receive system : Double conversion distortion) superheterodyne More than 100 mW (with 500 Ω Side tone •...
  • Page 20 SPECIFICATIONS (VFO CHANNEL ID LIST) • Channel spacing: 25 kHz (Actual frequency is displayed.) • Channel spacing: 8.33/ 25 kHz auto selection mode Operating Freq. Channel spacing Channel ID Operating Freq. Channel spacing Channel ID (MHz) (kHz) (Displayed Freq.) (MHz) (kHz) (Displayed Freq.) 118.0000...

  • Page 21: Opc-871 Headset Adapter/Other Options

    OPC-871 HEADSET ADAPTER/OTHER OPTIONS I OPC-871 Headset adapter D D Installation The optional OPC-871 HEADSET ADAPTER install as When using an optional headset, such as those from the follows. David Clark Co. via the adapter the transceiver outputs your q Turns the power OFF, then disconnect the DC power transmitted voice to the headset for monitoring.

  • Page 22: I Other Options

    OPC-871/OPTIONS I Other options • Bent the plastic dust cover before install the strain relief into the notch. OPC-871 HEADSET ADAPTER (See pgs. 18-19) CS-A110EURO CLONING SOFTWARE Provides quick and easy programming of items, including pri- ® vate channels, scan settings, etc., via an IBM compatible PC ®...
  • Page 23 OPTIONS...
  • Page 24 A-5619H-1EU-w Printed in Japan 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan © 2001 Icom Inc.

Table of Contents