Digital Operation; I Transmitting A Call - Icom IC-F4029SDR Instruction Manual

7

DIGITAL OPERATION

I Transmitting a call

The [Side1] (Code) key toggles between the standby mode
and the Common ID selection mode when pushed. During in
the ID code selection mode, [Side2] (CH Up) or [Side3] (CH
Down) selects the desired Common ID.
q While in the standby condition, push [Side1] (Code) to
enter the Common ID selection mode.
• " " appears.
w Push [Side2] (CH Up) or [Side3] (CH Down) to select the
desired Common ID. Then push [Side1] (Code) to set.
(p. 39)
e Push [PTT] to call.
• " " appears.
• When a member of your group station answers your call, the
transceiver emits beep tones and "
Appears
19
Common ID Appears
" appears.
Appears
r Push [PTT] to transmit; release to receive.
t Push
(Clear) to send the 'Clear down' signal.
• Either station can send a 'Clear down' signal.
• "STANDBY" is displayed for 2 sec. (approx.)
• " " disappears and the transceiver returns to the standby con-
dition.