D Receiving A Position Request Call; Receiving A Geographical Area Call - Icom IC-M505 Instruction Manual

25W
TAG
Received
All Ships
<Paul
<CLR ˘
Beep Off>
D Receiving a geographical area call
While monitoring Channel 70 and a geographical area call
(for the area you are in) is received:
➥ Emergency alarm or beeps sound depending on the re-
ceived category.
➥ "Received Geographic" appears in the display.
25W
TAG
Received
Geographic
<Osaka Bay
<CLR ˘
Beep Off>
➥ Push [CLR] to stop the beep, then push [CHANNEL•
ENTER] to change to the channel specified by the calling
station for voice communication; push other key to ignore
the geographical area call.
➥ Monitor the selected channel for an announcement from
the calling station.
When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all geographical area
calls are received, regardless of your position.
INT
SAFETY
INT
SAFETY

D Receiving a position request call

While monitoring Channel 70 and a position request call is
received:
➥ "Received POS Request" appears in the display.
➥ Push [CLR] to stop the beep, then push [CHANNEL•
ENTER] to reply to the position request call; push [CLR]
to ignore the position request call.
25W
TAG
Received
POS Request
<Paul
<CLR ˘
Beep Off>
D Receiving a position report call
While monitoring Channel 70 and a position report call is re-
ceived:
➥ "Received POS Report" appears in the display.
➥ Push [CLR] to stop the beep, then push [CHANNEL•
ENTER] to reply to the position report call; push [CLR] to
ignore the position report call.
25W
TAG
Received
POS Report
<Paul
<CLR ˘
Beep Off>
6
DSC OPERATION
INT
SAFETY
INT
SAFETY
6
43