Channel Name Programming; Memory Transferring - Icom IC-T3H Instruction Manual

6
MEMORY PROGRAMMING
I Channel name programming
q
Select a "Channel Name Indication" type in
.
(p. 50)
w
Push [C•
e
Push [A•
programming mode.
• The character to be edited flashes.
r
Rotate [VOL] to select a character.
t
Push [Y] to move to the right, [Z] to move to the left.
• Up to 5
• Usable characters are; A–Z, 0–9, "space", +, –, =, ✱, /, [, and ]
y
Push [#•
mode.
I Memory transferring
Memory (call) channel contents can be transferred to the VFO or
to another memory channel.
D Memory/call ➾ VFO
q
Select the memory (call) channel to be transferred:
Push [C•
Push [Y]/[Z] to select the memory channel.
• When [VOL] is assigned as "dial," rotate [VOL] to select the mem-
ory channel. (p. 50)
w
Push [A•
lected memory contents to the VFO.
• VFO mode is selected automatically.
25
] to select memory mode, if necessary.
MR
], then push [8•
FUNC
characters can be used for channel name
] to fix and exit the channel name programming
ENT
] ([ B• ]) to select memory (call) mode.
MR
CALL
], then push [C•
FUNC
] to enter into the channel name
SET
] for 1 sec. to transfer the se-
MR
INITIAL SET MODE
.