Scan Resume Condition; Scan Operation - Icom IC-T3H Instruction Manual

8

SCAN OPERATION

I Scan resume condition
When a signal is received during
scanning, the scan resume condition
determines what action the transceiver
takes. The transceiver has 2 scan
resume
illustrated at right. Use
select the one which best suits your
needs.
q
Push [A•
w
Push [Y]/[Z] several times until "SCP" or "SCt" appears.
e
Rotate [VOL] to select the desired scan resume condition.
• Pause scan: When receiving a signal, scan
pauses on the signal until it disappears. Re-
sumes 2 sec. after the signal disappears.
Timer scan: When receiving a signal, scan
pauses on the signal for 5 sec., 10 sec. or
15 sec., then resumes.
r
Push [#•
33
conditions available
SET MODE
], then push [8•
FUNC
] to set and exit
ENT
Pause
as
scan
to
Timer
scan
5, 10 or 15 sec.
] to enter
SET SET MODE
.
SET MODE
SET MODE
USING
Receiving
a signal
2 sec.
.
F
TX
MR
Pause scan
F
TX
MR
Timer scan